How is agricultural zoning determined in guilford county nc

The county zoning ordinance defined agricultural and farming purposes to include any area of realty that either comprised forty or more acres or comprised less than forty acres but brought in an annual gross income of $500 or more from any agricultural, farming, livestock, or poultry operation, exclusive of home gardens.

Full
Answer

How do I contact Guilford County Planning and zoning?

Planning Technician, Mitchell Byers (336)641-4662 [email protected] Zoning Investigator, Rhonitta Hayes (336)641-3154 (O) (336)669-8135 (M) [email protected]

Can farm property be subject to county zoning in North Carolina?

Even if the property qualifies as a farm, farm property used for nonfarm purposes can be subject to county zoning. North Carolina cases provide additional clarification on the definition of bona fide farms and exempted farm uses. [14]

What does the planning and zoning section do?

The Section develops and manages future growth plans, reviews land development plans, and is responsible for Zoning Enforcement. This section also supports the activities of the Historic Properties Commission, and provides staff support for the Guilford County Planning Board and Board of Adjustment.

Can a farm be zoned as a residential area?

Thus whereas a residence on a farm is generally subject to county zoning, a residential structure occupied exclusively by temporary farmworkers is likely exempt. The county zoning statutes, however, limit the use of zoning to prohibit residential incursion into agricultural areas.


What is ag zoning in NC?

The county zoning ordinance defined agricultural and farming purposes to include any area of realty that either comprised forty or more acres or comprised less than forty acres but brought in an annual gross income of $500 or more from any agricultural, farming, livestock, or poultry operation, exclusive of home …


What is R6 zoning in NC?

R6-: High Density Residential District – The purpose of this district is to provide a location for single family on compact lots, duplex and multifamily dwellings. Multifamily developments are special uses in this district.


What is R 20 zoning in NC?

The R-20 District is intended to accommodate low- to moderate-density residential development, as either single-family attached or detached dwellings on separate lots.


What is R 3 zoning in NC?

Purpose. The purpose of Residential District Three (R3) is to foster orderly growth where the principal use of land is low density residential. The intent of this district is to allow for residential development consistent with the recommendations of the Comprehensive Plan.


What is R4 zoning in NC?

The purpose of Residential District Four (R4) is to foster orderly growth where the principal use of land is low density residential. The intent of this district is to allow for limited residential development consistent with the recommendations of the Comprehensive Plan.


What is r5 zoning in NC?

B. R-5, Residential Single-family 5 District Page 3 City of Greensboro, North Carolina Land Development Ordinance – V20170818 Page 163 The R-5, Residential Single-family district is primarily intended to accommodate low-density single-family detached residential development.


What does r12 zoning mean in North Carolina?

The R-12 zone is intended to permit detached houses on moderately-sized lots. Detached Dwelling Units.


What does R25 40 zoning mean?

The codes R25 and below are considered low-density, while the medium density codes are R30 through R60. The codes R80 and above are therefore high-density areas. Most Perth suburbs and regional areas are zoned R20, but as you would expect, the suburbs closer to Perth CBD are R30 and R40.


What is a1 zoning in NC?

Usually designated as “A-1” land or zoning, the purpose of the zoning is to conserve and protect open land uses, foster orderly growth in rural areas and prevent urban agricultural land use conflicts. This doesn’t mean A-1 is reserved just for farm or agricultural uses.


What is R1 zone?

R1 zone is residential zone with road below 12. (Below 9 m in congested area) R1 zone purely residential zone, but up to certain extent small committed / medical uses are permissible in R 1zone.


What is peri urban use zone HMDA?

1.1.2. PERI-URBAN USE ZONE. Areas earmarked as Peri-Urban Use Zone, around the identified ‘Urban Areas Contiguous to Growth Corridor’ and ‘Urban Nodes’ in the proposed Metropolitan Development Plan.


What does R3 zoning mean NSW?

Zone R3 is a zone where multi dwelling housing is appropriate and encouraged. Multi dwelling housing can take the form of townhouses or villas, but residential flat buildings are prohibited.

Leave a Comment